Product Description

Banzai Protekto 2k is a two-componenent, nano-architectured, clear top-coating system designed to provide 3-5 years of surface durability in a single application and drastically cutdown on-going maintenance needs with easy to clean surface properties.

Applications:

Banzai Protekto 2k is used across industries-with heavy application across assets types in: Industrial, Engineering Equipment, Automobiles-Heavy, Light Construction, Architecture

Substractes

Metals-Mild Steel, Stainless Steel, Aluminium, Copper, Brass, others
Wood
Natural Stones
Selected Plastics

Benefits

• Durability of 3+ years in a single application
• Environmental Protection for extreme gloss and colour retention
• Humidity and Corrosion Resistance
• Easy-to-Clean Surface properties
• A very easy-to-apply coating
• Great aesthetic finishes

Key Approvals/Standards:

ASTM G115, ASTM G154, ASTM D4587, ASTM D3363, ASTM D4060, ASTM B117, ASTM D2794, ISO 2812- 2, ASTM D4752.

Form:

Appearance : Liquid, Colourless
Packaging: 1 Litre, 5 Litres, 20 Litres
(Component A: Component B::1:1)

Storage :

Store in dry area at temperatures between 15-20 degree celsius (higher temperatures reduce shelf life) Shelf Life-6 months un-opened; 1 days once opened Container must be closed immediately after use to avoid contamination from moisture; discard if liquid turns white.

Technical Data:

Chemical Base: Hybrid Polyurethane, Polyurea, Polysilane
Specific Gravity: 0.984
Max Operating Temperature: 80 degree celcius

Coating Properties:

QUV Resistance	100% Gloss Retention	(2000 h, ASTM D4587)
Salt Spray Test	No rust, no blisters	(2000 h, ASTM B117)
Pencil Hardness	2H Pass	(ASTM D3363)
Impact Resistance	Pass: 14 joules	(ASTM D2794)
MEK Resistance	>1,000; Pass	(ASTM4752)

Application Details:

Coverage:	140-150 sq.ft. per litre (including spray losses)
Dust Free Time :	15 Mins (@25 degree celcius, 50% R.H.)
Tack Free Time:	30 Mins (@25 degree celcius, 50% R.H.)
Handlable Dry:	3 Hours (@25 degree celcius, 50% R.H.)
Full hard Cure:	24 Hours (@25 degree celcius, 50% R.H.)
Mix Ratio:	Component A; Component B::1:1
Dry Film Thickness:	22-25micron
Surface Preparation:	Banzai Protekto 2k is designed to be a well adhered, long durability coating if applied on well prepared surfaces: Completed degreasing of surface, coating will not adhere to surfaces with residues, impurities. 400-600 grit sanding (or sand blasting) of surfaces is recommended for better adherence of coating.
Application Equipment:	Air Spray-Spray Gun- HVLP, LVLP (1.3-1.5 mm nozzle) Pressure at Gun-29-30 PSI Application with rollers, lint free fabric, other pads possible- contact manufacturers for details. Clean equipment with thinner/ace tone prior and post use.
Surface Detailing/Finish (if required)	Use orbital sander to sand with 1000, 1500, 2000, 2500 grit Sand papers sequentially. Use woolen buffing pad @ 1200 to 1400 rpm with a cutting compound. Go over as many passes as required to remove marks.

Safety: Refer to MSDS